FIREBOX Fire Extinguishing Simulator

The propane-powered training device is environmentally friendly and clean when training with liquid or CO2 extinguishers.
Training can be organized closer to the customer (e.g., in the yard area, etc.).
Remote-controlled ignition and gas management free the trainer to focus on training, increasing safety and allowing training with a single trainer.
Stepless pressure adjustment allows for adjusting the difficulty of extinguishing.
Easy and quick start and dismantling of exercises increase cost-efficiency.
The control unit is equipped with clear indicator lights that facilitate use and enhance safety. Equipped with a battery, battery charger, and voltage meter.
Wireless remote control for ignition and gas flow.

FIREBOX-S

Stainless steel
Voltage 12 V, Water volume 15-20 liters
Overall dimensions L x W x H approx. 60 x 105 x 70 cm
Fuel: propane (1 pc 11 kg bottle)

Usage:

1. Fill the basin with water above the burner pipe.
2. Attach the pressure regulator to the propane bottle by turning it counterclockwise.
3. Press the power switch on the control unit.
4. Open the gas bottle.
5. Press the smaller button on the remote control (orange light, buzzer, and ignition burner turn on).
6. Press the larger button on the remote control (red light and main burner turn on).
7. Press the smaller button on the remote control (orange light and ignition burner turn off).
8. To extinguish, after the flames are out, press the larger button on the remote control (red light and gas supply turn off). Repeat steps 5-8 until training is complete.
9. Close the gas bottle, detach the pressure regulator, and remove the water from the basin through the drain valve.

Detailed maintenance and operating instructions are provided with the device.